Part Number Hot Search : 
4A18R C0402C 0N06L 2SC2258 400MA EL711DI 5236B EC2C42
Product Description
Full Text Search
 

To Download IL33091AN Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 IL33091AN, IL33091AD Powerful High-grade FET driver
Description of basic functions. Developed microcircuit is a high-performance driver of high -potential power field MOS transistor control designed for use in harsh automotive switching applications requiring the capability of handling high voltages on power line attributed to transient commutation of loads in conditions of automobile exploitation. Load of microcircuit is a device on the base of MOS transistors that enables switching high current levels in automobile electrical system. Microcircuit has Fault indication output when there is short circuit in load or when load transistor current level exceeds preset value.
IL33091AN IL33091AD Functions Microcircuit provides pumping of charge (on Designation of microcircuit in plastic output capacity on pin Gate of gate control)to packages: drive power MOS transistor. Input Input , IL33091AN - in DIP-package MS001BA compatible with logic levels of CMOS IL33091AD - SO-package MS-012AA microcircuits ,controls pumping of charge (switch TA = -40 / +125 in/switch off). Check of drain-source voltage is implemented package drawings (VDS) on power S transistor, detection of shorted load , presentation of error signal on pin Fault. Microcircuit has pin VT of timer, that is both input in timer window comparators and output of current square circuit, depending on r m s voltage drain-source on power MOS transistor, as power dissipated in S device is proportional to VDS2. External resistor RT and capacitor CT, connected to timer pin enable programming of timing data necessary for protection of power MOS-device.
Internal circuit of stabilizer diodes with the total break down voltage of about 30V provides protection of microcircuit and power S transistor from supply voltage value to be exceeded. Activation of microcircuit Zener stabilizer diodes attributed to switching-off S transistor for the time when supply voltage value exceeded , in addition pin Fault does not change its logic state .
1
IL33091AN, IL33091AD
Features. * Works with a wide variety of N-channel power field transistors * Input of control compatible with CMOS logic * Built in pumping of charge without external components * Detection and protection from shorted load and current exceeding * Failure unit reporting a FET overcurrent and shorted load condition * Possibility to connect induced loads * Forward overvoltage and battery polarity reverse protection * Extended range of operating temperatures
Table of Maximum operation ratings and absolute maximum ratings . Maximum operation ratings and absolute maximum ratings of exploitation
Name of parameter , unit of measurement Symbol Maximum operation rating Standard min max 3 4 7,0 24,0 Absolute maximum rating Standard min max 5 6 -0,7 28,0 10 1,0 Vin -0,7 28,0
1 supply voltage on output VCC (pin 05), V Consumption current in mode of limiting by protection (input 05), m DIP package SO-8 package Range of adjusting voltage on input Input (pin 07),V (direct voltage)
2 VCC IC
range of voltage, delivered to pin (pin 06), V (direct voltage) Temperature of chip, Temperature of storage, operation range of ambient temperatures,
VOUT TJ TSTG A -40 125 -0.7 -65 -65 -65 28,0 150 150 150
able of electrical parameters . Electrical parameters of microcircuits IL33091AN, IL33091AD
Name of parameter, unit of measurement Symbol Mode of measurement standard note
min
max
2
IL33091AN, IL33091AD
consumption current, m Limitation value of supply voltage on pin Vcc (pin 05), V output voltage range on pin Gate (pin 04) relatively voltage of power supply source Vcc, V current on pin Gate (pin 04), output voltage of saturation on pinGate (pin 04), V voltage on pin Gate in mode of load short circuit (pin 06), V Threshold voltage on input Input (pin 07), V input current of pin Input (pin 07), current coefficient of timer (pin 08), /V2 threshold voltage of synchronization (pin 08), V lower level upper level current on pin (pin 06), Voltage of saturation on pin (pin 06), V Icc Vz VGS IG VG(sat) VGC VIL VIH Iin VG =Vcc IG =10 Vin = 0 V: Vin=5,0 V (Rx=100 khm): 29,0 8,0 30 0 6,4 3,5 0,7 0,3 6,0 35,0 15,0 400 1,4 7,7 1,5 250 1,5 2 3 4 5
Vin=5,0 V Rx=100 khm, V=0, VDC=1,0 V
VTL VTH IOL IOH VOL
VF =5,0 V VF =0 IF =500
0,4 4,3 500 -
1,2 5,2 0,1 0,8
-
Note 1 .Standards for electrical parameters of table , unless otherwise noted , are given for conditions : 7,0 V Vcc 24 V; -40 a 125. 2 .Measure total consumption current on pins 02 and 05 of microcircuit (when resistor is Rx=100 khm, connected to pin 02, and resistor with the value of 45 khm, connected to pin 06). 3 . Protection of device from short-term voltage surge on power line at the expense of internal circuit of semiconductor stabilitrons. 4. Measure voltage relatively pin SRC in shorted load mode , when voltage on load approximately will make less than 1 in relatively potential general. Mode of measurements , residual stress on load of short-circuit mode are to be specified in the course of development basing on the reference dependence reading results for temperature range. 5 Current coefficient of timer is a constant (coefficient )of proportionality of voltage into current conversion, used to check VDS voltage, formed on field transistor. For microcircuit IL33091AN, arranged in 8-pin plastic DIP-package of MS-001BA type, Rtja is 100 /W; For microcircuit IL33091AD - arranged in 8-pin plastic SO-package of MS-012AA MC33091AD type, Rtja is 145 /W. permissible value of static potential value is 2000 V (human body model). Nominal block diagram and IC connection circuit
3
IL33091AN, IL33091AD
4
IL33091AN, IL33091AD
able of pin purpose. Table of pin purpose of microcircuits IL33091AN, IL33091AD
of pin 01 02 03 04 05 06 07 08 Purpose of pin pin of voltage check on load (SRC) pin for connection to resistor generating current dependence from voltage on external transistor (DRN) general pin (GND) pin of external transistor gate control (Gate) pin of connection to supply voltage chain (Vcc) pin of emergency indication () control input (Input) pin of timer timesetting circuit (V)
5


▲Up To Search▲   

 
Price & Availability of IL33091AN

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X